I am converting over a little 10x24 lathe and benchtop knee mill. These are just machines for home/hobby use to they don't need to be blazingly fast or run for 16hrs. a day.
I got some e661 DC servos for the mill X,Y, and Z and for the Z on the lathe. I was thinking of something smaller though for the X axis on the lathe and to put on my little 8" rotary table. There are a pile of cheap e240 servos with encoders on ebay right now. I have tried to find specs, but have found conflicting info as to them being 45V or 60V etc. My power supply transformers have 60V secondaries, but also have 20V and 40V taps so I could always add another rectifier and capacitor bank if needed. Does anyone know of a way to find out what the specs are for a particular motor part number in this series? Or do you have other suggestions for a better suited servo that won't break the bank? Thanks!
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
