Ah - it does work.. (the axis splash screen has G64 - resetting the ini startup..)
sam On 03/29/2017 02:39 PM, Todd Zuercher wrote: > It works, but... And this is a big but. If an operator or machine file > changes the g64 setting, it will not be changed back to that default start up > setting until the next time Linuxcnc is closed and restarted. This is why a > proper proper file preamble for your g-code files is so important. Another > possible work around would be a script that adds the correct g64p0.005 (or > what ever the chosen tolerance is) to the first line of every file when > Linuxcnc opens it. It could be over-ridden by adding another g64 line saved > in the file. > > ----- Original Message ----- > From: "sam sokolik" <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Sent: Wednesday, March 29, 2017 3:02:26 PM > Subject: Re: [Emc-users] Version 2.7 positioning problem during cnc > operations > > Does that work? I tried that on 2.7 sim and it didn't seem to work. > (unless I was doing something stupid) > > On 3/29/2017 1:54 PM, Tomas J wrote: >>> Currently the fix is adding G64Px.xxx at the beginning of all programs. >> Or add "RS274NGC_STARTUP_CODE = G64 P0.02" to [RS274NGC] section of .ini >> file... >> > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
