Greetings folks;
What I see by "strace linuxcnc -l"
rt_sigaction(SIGINT, {0x4ec90, [], SA_RESTORER, 0x76dc8180}, {0x65f60,
[], SA_RESTORER, 0x76dc8180}, 8) = 0
wait4(-1, Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
Unknown board: HOST????
hm2_rpspi: rtapi_app_main: Operation not permitted (-1)
./hm2-7i90-stepper.hal:38: waitpid failed /usr/bin/rtapi_app hm2_rpspi
./hm2-7i90-stepper.hal:38: /usr/bin/rtapi_app exited without becoming
ready
./hm2-7i90-stepper.hal:38: insmod for hm2_rpspi failed, returned -1
Which isn't significantly different from what I see on-screen when I try
to run it as me. This strace was me in fact.
hm2_7i90 is present, as is hm2_rpspi, in
pi@raspberrypi:~/linuxcnc/configs/sheldon-lathe $ ls -l `locate
hm2_rpspi.so`
-rwxr-xr-x 1 root root 6424 Dec 18
09:01 /usr/lib/linuxcnc/modules/hm2_rpspi.so
pi@raspberrypi:~/linuxcnc/configs/sheldon-lathe $ ls -l `locate
hm2_7i90.so`
-rwxr-xr-x 1 root root 10516 Dec 18
09:01 /usr/lib/linuxcnc/modules/hm2_7i90.so
All file rights are 0755 from /usr/lib to the modules themselves.
root:root owns them all, so what is this "no permissions" actually
telling me?
That part of the ini file:
[HOSTMOT2]
DRIVER=hm2_rpspi
BOARD=hm2_7i90
CONFIG="num_encoders=1 num_pwmgens=1 num_stepgens=2"
Which is not changed from when it was working a week ago.
Obviously I'm missing something, but what.
21:00 local time, must be beer thirty here. Another loooong day,
including about 3 or 4 hours on the rider.
Thanks all.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
