----- Original Message ----- > From: "Jon Elson" <el...@pico-systems.com> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Sent: Thursday, May 11, 2017 12:58:08 PM > Subject: Re: [Emc-users] Installing On Older Computer > > On 05/10/2017 10:22 PM, Todd Zuercher wrote: > > Latency is fine with Lucid(RTAI). With Wheezy(RTAI) the > > latency test will not even open, it just hangs with > > nothing coming up in the terminal window, but the pc > > itself still keeps going (can open other programs). > OK, there's the problem. Something is really wrong in the > RT system, or maybe just the CPU is being slowed down > drastically for some reason. The drivers for certain > graphics cards can do bad things, but that usually requires > a graphical display to be running. > > Jon >
It is only running with on board video (no video cards), there is a display attached. If I boot from the Linuxcnc live Wheezy ISO (using a USB thumb drive). It eventually boots and opens a desktop. If I open a terminal window and type Linuxcnc. The config picker opens, I select something, then nothing else seems to happen. The computer is not locked up, I can open and do other things, but no word of anything from Linuxcnc, and the terminal window is blank. (going from memory here, as the machine is running production work now.) The same thing happens with the latency test. I know there is something very wrong. But I don't know were to even look to find out what. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users