> # Use this NML config on the computer running the realtime parts of emc2 > # in a networked system. The host address should point to the computer > # running the GUI (although this is not critical). > # Change the NML_FILE in emc.ini to server.nml. > # Start emc2 normally, and then run the GUI client. > > so I can run in rt-pc a non gui Lcnc session, than in other pc using > server.nml can run axis gui session for example? > And these is not well tested .... ok.
This is what I plan to do in next step as soon as I am done with my driver cards, as is now it mostly about figure out practical things for assembly. I got my first machine almost up and running, one of the axis is hard to move and need some lubrication. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users