On Saturday 24 June 2017 11:53:57 Gene Heskett wrote: > Greetings all; > > Trying to get a handle on the tool.tbl, I noted that tool 6, which I > think I added a couple years back to help me see some gcode I was > writing at the time, better. > > But I just fired up the latest sym and cannot execute the m6t6 > command, LCNC say it cannot do it until homed. > > Just one problem, it IS homed with the register icons enabled left of > Rad and Z in the backplot. > > ??? Won't "run" anything in fact. > > 2.8.0-pre-3187 > > Anything I can check/do? > Apparently this is a sim only problem, I just checked a real machine, and it works as expected. So far, only one canary has died. ;-)
Thanks everybody. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
