Hi,
The bad news is that my spare Koyo encoder is toast, why I don't know.
Apparently happened a while
ago and I didn't label it; sloppy on my part.
Checked X axis with another encoder I swiped off the lathe and got
reasonable counts.
Now to order a couple of spares.
However, I have this thru-shaft encoder I must have picked up surplus
somewhere.
Sumtek LHF-078-5000. Best I can tell it is 5000 ppr max freq of 250 KHz.
Voltage, pin out and
output unknown except for being marked A, B, Z. Connector is a 3 x 3
with 7 used.
Apparently the output is a line driver. Probably not worth fooling with
but interesting.
Dave
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
