Greetings all;
Once more the conciseness of a man page does not answer my question.
Specifically the man page for oneshot, which says:
oneshot.N.reset bit in
Reset
But doesn't state the logic level that would reset it if its currently a
running timer. Logic 0, or a logic 1?
With the hal file you can get from my web page, this timer runs for 5
seconds, and if, as the point is approached, the gain needs to be
reduced, presently I have to wait until the timer has expired before the
pushbuttion's push is recognized to put that dial in the gain control
mode again. If the logic 0 from the button can stop the timer, then the
gain mode can be re-entered at any time. I hope. Waiting 5 seconds after
the last dial motion to re-enter the gain setting mode seems like a huge
waste of time.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
