On Saturday 26 August 2017 07:38:28 Mark wrote: > Seems odd they have a California USA mailing address and their web > site is hosted on an Italian server. > > Mark
I had my reservations, ISTR they talk about a raspberry-pi, but is that not a BBB in the video's? I've gotten 2, but one came from thunderclap, not mailchimp. And mailchimp has been a PITA since they went in business quite a few years ago. I might have to write another filter rule if they get too obnoxious. At one point in the video they talk about very high frequency drivers, but you can't get much over 250 kilohertz through an opto-isolator reliably. BTDT with my own testing, So unless they are using the capacitive couplers even in their motor driver hardware, an expensive item, they are full of it. OTOH, its occassionaly enlightening to see what the competition is up to. :) > On 08/26/2017 05:08 AM, Valerio Bellizzomi wrote: > > This has been received today, I wonder where they took my address... > > > > > > -------- Forwarded Message -------- > > From: Joseph Coffland <[email protected]> > > Reply-to: Joseph Coffland <[email protected]> > > To: Valerio Bellizzomi <[email protected]> > > Subject: Buildbotics CNC controller coming to Kickstarter Sept. 1st > > Date: Sat, 26 Aug 2017 00:36:37 +0000 > > > > > > Hello fellow Open-Source CNCer, > > > > We are only one week away from launching the Buildbotics Open-Source > > CNC controller on Kickstarter. Now we need your help to get the > > word out. Please follow the link below and click on one of the red > > support buttons. Follow the instructions to send out a short > > one-time message on Sept. 1st to your social media contacts. > > > > > > https://www.thunderclap.it/projects/60431-open-source-cnc-controller > > > > You may also be interested in our Open-Source CNC simulation > > software CAMotics. > > > > Here's a video of our recent rebuild of a Dyna 2400 CNC using > > the Buildbotics CNC controller. > > > > Input caption text here. Use the block's Settings tab to change > > the caption position and set other styles. > > We will send one more reminder email on Sept. 1st. Thanks for > > your support. > > > > Regards, > > > > Joseph Coffland > > > > > > Copyright © 2017 Buildbotics LLC, All rights reserved. > > You are receiving this email because of your interest in > > Open-Source CNC. > > > > Our mailing address is: > > Buildbotics LLC > > 523 6th Street > > Petaluma, CA 94952 > > > > Add us to your address book > > > > > > Want to change how you receive these emails? > > You can update your preferences or unsubscribe from this list. > > > > Email Marketing Powered by MailChimp > > > > > > > > -------------------------------------------------------------------- > >---------- Check out the vibrant tech community on one of the world's > > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
