Is there a similar quality unit that works with Windows?

> -----Original Message-----
> From: Chris Albertson [mailto:albertson.ch...@gmail.com]
> Sent: Friday, November 10, 2017 11:04 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touchegg with LCNC - Linux multitouch gesture
> recognizer
>
> This does not have to be on a touch screen.  It works on a conventional
> track pad.   The problem is most trackpads or such incredibly low quality.
>   Good ones are expensive.   I use one of these daily:
> https://www.amazon.com/gp/product/B003XLYAWC/ref=ask_ql_qh_dp_hza
>
> If you are a machinist they are interesting devices because they are
> milled from aluminum billets then sand blasted to remove the machine tool
marks.
> The top surface is covered with a very thin 1mm layer of glass with a
> ground surface to remove "stickiness"
>
> Logitec also makes some but they cost more and are not as well made,
> just typical plastic trackpads.
> https://www.amazon.com/LOG910003057-Logitech-Wireless-Rechargeable-
> Touchpad/dp/B0093H4WT6/ref=pd_bxgy_147_2?_encoding=UTF8&psc=1&ref
> RID=9D833CWHZAT0TGHYD86M&dpID=21pCaESx4OL&preST=_SX300_QL70_&
> dpSrc=detail
>
>
>
> On Thu, Nov 9, 2017 at 6:03 AM, bari <bari00...@gmail.com> wrote:
>
> > Has anyone tried Touchegg with Linuxcnc and have any feedback on how
> > well it works?
> >
> > https://github.com/JoseExposito/touchegg
> >
> > https://www.youtube.com/watch?v=28Jjf5Ak6Q0
> >
> > No deb package. Libs were written by Canonical.
> >
> > The last time we tried multitouch with LCNC every user eventually
> > asked for a keyboard and mouse. This was with a 23" LCD, so the
> > problem wasn't resolution or size of the buttons.
> >
> > -Bari
> >
> >
> > ------------------------------------------------------------
> > ------------------
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > _______________________________________________
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
>
>
>
> --
>
> Chris Albertson
> Redondo Beach, California
> ----------------------------------------------------------------------
> -------- Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to