2018-01-09 1:29 GMT+02:00 Gregg Eshelman via Emc-users: > What I can't find on those Harmonic Drive brand harmonic drives is one > single useful bit of information on how big or small they are. All I've > been able to find are motor size numbers, that appear to be something > proprietary, they're not listed as NEMA or any other standard, just plain > numbers. > If I was going to get one for use on a small mill like a PLM2000, I > wouldn't want to end up with something a foot in diameter weighing 50 > pounds, nor would I want to get one so tiny it'd be a flyspec on a large > mill's table.
I can't find FHA-B type either. But here is similar FHA-C actuator with dimensions http://www.harmonicdrive.net/products/rotary-actuators/hollo w-shaft-actuators/fha-c PS: Same set cheaper https://www.ebay.com/itm/272996989905 Larger set 32 size https://www.ebay.com/itm/272996992332 But these are from China (vs. Korea) Just make sure the drive supports step/dir or analog ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
