I have seen the TRAM error but can't remember exactly why. On Wed, 7 Feb 2018 14:46:32 -0500 "Eric H. Johnson" <ejohn...@camalytics.com> wrote:
> All, > > > > Just this week I started getting TRAM errors on a machine that has been > running for years. This system uses the Mesa 7i43 card. I had this happen > once before, but on a new machine with a brand new 7i43 card. I replaced the > card and the problem went away. On this machine I replaced the 7i43, and it > ran for about 3 hours flawlessly, then the TRAM error came back. It so > happened that the 7i43 is the 400K version and the old one is the 200K, so > running a different driver as well. > > > > Is the problem now likely the parallel port on the motherboard, or is there > some place else I should be looking. I have disconnected and reconnected the > cables multiple times, so I doubt that is the culprit. > > > > Thanks, > > Eric > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users