On Tue, May 8, 2018, 18:21 John Dammeyer <jo...@autoartisans.com> wrote: Or is the head trammed in as close as possible and then left there forever?
I recommend tramming to as close as possible with spindle down, then drilling and reaming for a shoulder bolt or other removable pin as a pinched Bridgeport head will not maintain tram , especially with CNC loads. My matson only tilts along the b axis and has a hole through the head mounting that I am Keen to one day take advantage of and make a 4 axis with. > > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
