On Tuesday 08 May 2018 19:57:15 John Dammeyer wrote:> I had a brake disk surface ground so it can be laid on the mill table > and a dial indicator swept around without jamming into the T-Slots. > For the work I've done to date it's been adequate. It fits on my > surface plate so I could scrape it even flatter and maybe someday it > will move up to project #42. > > John >And thats the only correct answer, with credits to the Hitch-hikers guide >of course. ;-) >Actually, that does sound like a decent solution to that problem. It >would certainly speed it up quite a bit. >Now to find a disk and flatten it... Robert Ash-So, would a new disc brake be ok or need finer finish?If it can be used as is..I have a new one that someone could get for a ship pickup order. I think I gave 4 bucks for it and bearing hub at Flea sale.Robert AshNDBGA ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
