On 08/29/2018 11:44 AM, Todd Zuercher wrote:
I have not yet found any other 2 port PCIe cards that use a different chip.
Ah, for PCIe, I use the Syba SD-PEX10005 which uses the
MOSCHIP MCS9900 (or sometimes the MCS9901) chip. This is
only a single parallel port, but it seems to work fine. I
sell these to use with my boards that require an EPP port.
I have not tested anything other than the proper EPP
operation, but most DEFINITELY, that requires output on pins
1, 14, 16 and 17 to work. However, some of those pins may
be taken over by the EPP mode logic when set for EPP mode,
on some boards. But, they should work as outputs when in
bi-dir mode.
Jon
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
