Baldor will not reply. Rockwell bought Reliance in the 90s. The electrocraft products became Rockwell Automation Products (Allen Bradley) Later Rockwell sold Reliance to Baldor but kept the Electrocraft stuff.
John Figie On Wed, Oct 3, 2018, 10:06 AM Roland Jollivet <roland.jolli...@gmail.com> wrote: > Thanks for the .pdf link. > I did send the details to Baldor (was ElectroCraft) and will see if they > bother to reply. > > Yes, the low speed is confusing because it obviously has very low > inductance windings to get the instantaneous torque. > Ahh, maybe the rating is specific to the application since it's probably a > custom order. It had an 80mm spur gear that drove a 2m diameter ring that > sits around the patient. So one wouldn't want that spinning at a 1000RPM or > so. > > I'll explore the drive. If I can get a direct/ and belt set-up with 1:1 and > 1:3 I'll be quite happy. > > > > On Wed, 3 Oct 2018 at 16:36, andy pugh <bodge...@gmail.com> wrote: > > > On Wed, 3 Oct 2018 at 15:05, Dave Cole <linuxcncro...@gmail.com> wrote: > > > > > > I would find the original drive specs for that motor. I'm sure they > had > > > a matching drive for it. > > > > I think it is a close relative of these: > > > > > https://literature.rockwellautomation.com/idc/groups/literature/documents/td/1398-td001_-en-p.pdf > > > > The nameplate decoder at the back fits, to an extent. > > > > Possibly S-6300 is a special? > > > > I would be tempted to connect it to a drive and see what happens. > > Others in the family with similar peak torque seem happy at 3000 rpm. > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > — George Fitch, Atlanta Constitution Newspaper, 1916 > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
