He ... today I try again my experiments about QtDro .... try to print dro in a qwidget inside an QApplication .... I USE a SIM only installation and i receive these messages (for first start sim/axis/axis_mm.ini aftter my QApplication) ... the error printed on my debugger (the messages become from linuxcnc file):
libnml/cms/cms_cfg.cc 496: No buffer-line entry found for buffer emcStatus in config file /home/mypc/linuxcnc-dev/configs/sim/axis/axis_mm.ini. libnml/nml/nml.cc 370: NML: cms_config returned -1. ********************************************************** * Current Directory = /home/mypc/linuxcnc-dev/scripts * ********************************************************** * BufferName = emcStatus * ProcessName = xemc * Config File = /home/mypc/linuxcnc-dev/configs/sim/axis/axis_mm.ini * error_type = 0 (NML_NO_ERROR) ************************************************************ libnml/nml/nml.cc 1343: NML::peek: CMS not configured. args.[0] contains? ....... "/home/mypc/linuxcnc-dev/scripts/QtDro" /** my debug messages **/ The program has unexpectedly finished. /** my debug messages **/ /home/mypc/linuxcnc-dev/scripts/QtDro crashed. /** my debug messages **/ The question: but SIM use emcStatus channel or not? why these error: libnml/nml/nml.cc 370: NML: cms_config returned -1. regards bkt _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
