I've some experience in tool path programming, and also some experience
in c. So I wonder if I can help you with this?
If you want to, that would be great. You would need to check with
mozmck if this would be acceptable for introduction in to 2.8 at this
point. (I think probably it would, a new G-code shouldn't affect
existing behaviour)
I will probably do that if I get time.
Just be aware that if all you want to do is make things on your lathe
then you can simply install the remap on your current LinuxCNC
installation and you will have G71 and G72 available (no coding, no
compiling)
I think that would be the choice until G71 get implemented in the
interpreter, either by me or by anyone else.
I have no experience in GCode-remapping, so I wonder if you can help me
a bit.
I have read something on the web, and I understood that I should put
something in the RS274NG section and some python files at some location
to get it to work. Can you just explain better?
(Note, I don't think the docs is bad, I just think it will take less
time to ask some smart people than try to figure it out myself.)
Best regards,
Tage
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
