Explain more? Aren't those press fit in? They usually all have an asymmetric arrangement of the ball circuits. So with five circuits, if you have five grooves you can still turn them around. If ten, then you can't. Obviously I don't mean rotate on the rail axis, but swing 180deg horizontally.
On Tue, 30 Apr 2019 at 19:35, Les Newell <les.new...@fastmail.co.uk> wrote: > Hi Roland, > > These are supported rails with open bearings that can't be rotated. That > was one of the first things I checked ;-) > > Les > > On 29/04/2019 16:52, Roland Jollivet wrote: > > Les, have you looked at turning the bearings around? If it's easy enough, > > you could press the bearings out and swing them 180 degrees. They'll now > > run on a new part of the rail. > > Assuming of course, that the front and back are similarly mounted and > have > > both been making the same groove. > > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
