On Sun, 14 Jul 2019 at 22:42, John Dammeyer <jo...@autoartisans.com> wrote:
> > > M30 (and M2( explicitly sets back to G54. > > http://linuxcnc.org/docs/2.7/html/gcode/m-code.html#mcode:m2-m30 > > Thanks. > > > > Maybe use G54 if you are only going to use one? > > There's a long story as to why I wanted two. But too involved. I think > once I have the Z axis home switch installed for Machine Workspace Home I > can investigate the others. > > John <https://lists.sourceforge.net/lists/listinfo/emc-users> > Another trick to set the X, if you are using the vise, and want to be quicker than using a wiggler; - mount an accurate 10mm rod/shaft in the tool holder (you could even just use the current cutter) - descend the Z (spindle off) - set the DRO to -5mm - slide the piece in the jaws until it touches the 10mm shaft. Clamp . done.. Roland _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
