Hi guys I am having trouble with my step and direction pulses running my servo drives on my cnc mill.
I did have them all working on the bench 2 weeks ago, but now I must have changed something when I installed the electrical panel on the machine and I am thinking that I may have gotten a bit stuck and have the wires wrong. I checked the pinouts at both ends and it looks good but I think it must be something simple that I have missed.. I can't even get a simple stepper motor going so the problem is not with the servo drives. The mesa board used to work and I haven't shocked it since and both leds look ok.. The board is not isolated at the moment and is connected with metal stand offs I didn't have any plastic handy. Not sure if that could cause issues.. Anyway any ideas let me know please. Hopefully it just needs a good nights sleep and I will find something in the morning. Ps one thing I would love to hear about is some good timing values for servo drives running step and direction. I would love to get from anyone who has some good values to use. Regards Andrew <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
