More test say the little ethernet module is not good enuf
Iperf shows 3.3MBits/sec.
Using the usb eth0 as a benchmark,
linuxcnc axis display is a lot slower and very choppy.
And as an aside
Enabling the opengl hdwr option #1 disrupts the gpio ethernet ( can ping
any other system)
but mode 2 * ( no kms ) works, just slightly less choppy
so
fergitaboudit
tomp
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
