ok, sounds right.
I (for now) want to get two paxton/patterson machines (mill and lathe)
going again. hey would need some special cabling, but figured that out
a long while ago.
Once i have that going again, I want to use a better controller/driver,
then the ones built in.
(I can show two pics if anyone is interested).
I want to use linux-cnc, either Debian 9 or 7 (I managed to install
Debian 9, the newer one?)
Ron
On 12/3/19 8:33 PM, bari wrote:
I have been using these:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?WCH
You only need fully EPP compliant if you are connecting it to an FPGA
like Mesa.
On 12/3/19 9:19 PM, R C wrote:
Hello,
what would be a good PCIe card t use with linux-cnc, would any card
that does ECP/EPP do?
thanks,
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
