I have never tested WB Weld with a magnet. I have a bunch of powerfull magnets around and never thought to see if one would stick to a tube of JB Weld.
But I've used other epoxy systems. You can mix many things with epoxy, up to over 80% by volume and the composite is MUCH stronger than pure epoxy. JB uses metal but it is much more common to use glass or carbon fiber or silica powder. I have a container of "milled fiber" that is basically glass dust as fine as baking flour. That stuff mixed with epoxy turns out about as hard as glass. Used this why the epoxy is not so much a glue but a part that is shaped by the space it filles, hence the advice to cut a key or retaining grooves. On Tue, Feb 11, 2020 at 11:56 AM Gene Heskett <[email protected]> wrote: > On Tuesday 11 February 2020 13:34:29 Chris Albertson wrote: > > > "JB Weld" Epoxy. It is a mixture of two part epoxy and steel powder. > > Get it at any auto parts store or Home Depot. > > > It it magnetic enough to fool an ATS-667? Thats been the reason I > haven't tried it. I have some but it could be getting old by now. > > Thanks Chris. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
