I know nothing about twincat, but it is cool.
On Sat, 2020-03-28 at 18:41 +0100, theman whosoldtheworld wrote: > twincat magician? > > Il giorno sab 28 mar 2020 alle ore 17:29 Valerio Bellizzomi < > vale...@selnet.org> ha scritto: > > > On Fri, 2020-03-27 at 13:31 +0000, andy pugh wrote: > > > On Fri, 27 Mar 2020 at 13:00, Valerio Bellizzomi <vale...@selnet.org> > > wrote: > > > > > > > This actially means they have an advanced control system. Can really > > > > LinuxCNC do the same with metal additive and subtractive plus > > metrology? > > > > > > Yes and no... > > > > > > LinuxCNC can't control three independent robots like this machine can. > > > > > > But I would expect that the interactions between the robots were > > > handled in the CAM layer, not in the machine controller. > > > > They talk about an advanced control system, no idea what that means > > though. Is it possible that they can control the 3 robots > > simultaneously? > > > > > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
