By the way, this is the firmware I'm using now that Peter genly made for me. I needed it with a special arrangement for the 7i44 because of the way I'm mounting the boards.
http://freeby.mesanet.com/5i24_25r.zip El mar., 28 abr. 2020 a las 20:13, Leonardo Marsaglia (< [email protected]>) escribió: > Hello guys, > > This will be probably for Peter but may be some of you have a similar > configuration. > > I'm having a little bit of trouble trying to drive my spindle VFD with a > step generator. I have an unused slot on the 6i24 and I have a 7i33 that > I'm not using. Could it be possible to write a firmware to use the 7i33 in > combination with the other two daughter cards (7i52s + 7i44)? > > I had the VFD working with analog voltage before this conversion so I can > stick to that config and I only would need to replace the firmware and plug > another board. > > Thanks! > > Leonardo > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
