On 30/04/2020 05:45, Przemek Klosowski wrote:
On Wed, Apr 29, 2020 at 5:05 AM Lester Caine<les...@lsces.uk> wrote:
For the observant ... what is wrong with the front and back image of the
BPI-F2S ...
OK I give up---what's wrong? I assume you're talking about
http://wiki.banana-pi.org/images/a/a6/850x371xBanana_PI_BPI-F2S_6.JPG.pagespeed.ic.6JAnstxchO.webp
'FPGA board interface' ... It looks like there are missing through hole
connections top and bottom, but actually this is the only way to
identify which way up to fit the FPGA board. It's only silk screen but
this is not immediately obvious? It looked like there was a JTAG port,
but there isn't ...
If you are using the FPGA board, then the Pi GPIO connector is
unavailable, but if the processor chip was available on a proper Pi
footprint board it would be attractive. The problem is that 'Banana'
make a lot of boards which are not 'Pi' compatible but still use the
'Banana Pi' branding :(
--
Lester Caine - G8HFL
-----------------------------
Contact - https://lsces.uk/wiki/Contact
L.S.Caine Electronic Services - https://lsces.uk
Model Engineers Digital Workshop - https://medw.uk
Rainbow Digital Media - https://rainbowdigitalmedia.uk
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
