On Tue, 5 May 2020, Leonardo Marsaglia wrote:
Date: Tue, 5 May 2020 22:11:11 -0300 From: Leonardo Marsaglia <ldmarsag...@gmail.com> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Mesa 7i73 keypad question/issueThank you Peter for your quick response,
So if I understand correctly, the 7i73.keycode pin is too fast to simply check it with halmeter by eye. But should I see the changes in halscope? Yes halscope will see any changes El mar., 5 may. 2020 a las 19:41, Peter C. Wallace (<p...@mesanet.com>) escribi??:
On Tue, 5 May 2020, Leonardo Marsaglia wrote: > Date: Tue, 5 May 2020 19:09:29 -0300 > From: Leonardo Marsaglia <ldmarsag...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net > > Subject: [Emc-users] Mesa 7i73 keypad question/issue > > Hello guys, > > I'm almost done with the config on the Mazak. The last thing I'm trying to > set up is the front panel keyboard. I'm using a 7i73 wich is already > working with the MPG and the lever to move the X and Z axis. > > The problem I have is, I can't make the keypad input to work. In HAL I'm > always reading the 64 value . I've tried to manually short the pins of one > column and one row to see if there's any change and nothing. I'm sure I'm > missing something something here, but I didn't want to experiment without > your opinion. > > I don't know If I'm forgetting to ground something, or to move a jumper. > Anyway, the P2 port of the board is working well. Please let me know what > you think. > > Thanks as always! > You cannot in general use the keycode as it only reports deltas (and only for 1 servo thread period) and a no-op code of 64 when idle (no changes) so you will miss the deltas in hal watch. Normally tye "matrix_kb" component is used to process the deltas into a static representaion of the keypad state > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination.
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
