It seems I have a set of GYS701DC2 and mating servo drivers sitting in a
big metal box with a laser sitting in the top of it. I think it's due
for stripping down so I can salvage all the usable bits, but I've hit a
bit of a brick wall I can't find any data on the motors such as what
encoder they are fitted with. Anybody got an old manual as google is
proving lacking.
While trawling around I cam across the JMC iHSV57-30-18-36 which looks
like a possible contender if I was starting from scratch. However once
again it does not list the resolution of the encoder, playing instead on
it's 'stepper motor' like setting. I've established that the built in
driver can handle any encoder from 1 to 2500 lines and it even lists
1000, 1250 and 2500 as the 'standard' encoder resolutions, but not how
to recognise just which one is fitted :( In my book, the 2500 line
encoder gives a native 10000 step resolution without any
'micro-stepping' and when combined with a 3mm pitch ball-screw ( on the
Taig mill ) looks like a magic combination.
Anybody using the iHSV57-30-18-36 and worked out what the native
resolution is? ... any feedback as to if it's even worth concidering?
--
Lester Caine - G8HFL
-----------------------------
Contact - https://lsces.uk/wiki/Contact
L.S.Caine Electronic Services - https://lsces.uk
Model Engineers Digital Workshop - https://medw.uk
Rainbow Digital Media - https://rainbowdigitalmedia.uk
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
