Awesome thanks Scott. I looks like my spindle needs some seals inside it above pull stud to work Aldo which I'm not sure about.
It's getting complicated lol. Regards Andrew On Wed, Jul 8, 2020, 1:06 AM Scott Harwell via Emc-users < emc-users@lists.sourceforge.net> wrote: > We used them at work. K&T used them on production equipment and I > remember only one failure and that was only a slight leak. > Scott > > > On Tuesday, July 7, 2020, 2:07:01 AM CDT, andrew beck < > andrewbeck0...@gmail.com> wrote: > > scott. have you used these much? I can design something to make sure > that > the rotary union is not subjected to direct thrust that should be pretty > easy. Just wondering how simple the rotary unions are to install. eg do > I just have to make sure they are running concentric and plumb them up and > away we go. I can see having a leak on top of the spindle could be a > very bad idea for spindle bearings lol > > regards > > Andrew > > On Sun, Jul 5, 2020 at 2:09 AM Scott Harwell via Emc-users < > emc-users@lists.sourceforge.net> wrote: > > > Andy, > > https://www.deublin.com/en/Product-Series?series=1101 > > Deublin units work well. The problem is tool retention design they will > > not take direct thrust. They may have other products you can adapt. > > > > Scott > > > > On Saturday, July 4, 2020, 5:54:27 AM CDT, andrew beck < > > andrewbeck0...@gmail.com> wrote: > > > > Hey everyone just wondering if anyone has ever used a rotary union to > > plumb through spindle high pressure coolant into their machine. I am > > thinking about doing it and just looking for advice. I have the high > > pressure pump already and there is a hole down the middle of my > spindle. I > > just need a rotary union I think and need to do some machining to make it > > all fit.. > > > > I have no idea what type of rotary union I need though.... > > > > regards > > > > Andrew > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
