On Sunday 12 July 2020 19:45:42 andy pugh wrote:
> On Mon, 13 Jul 2020 at 00:23, Gene Heskett <[email protected]>
wrote:
> > My first foray into using polar co-ords to do a couple of bolt
> > circles worked well, but I was mildly surprised to find that an
> > increased angle went CCW around the circle on my GO704.
>
> No, that's right.
>
> It's the way mathematicians do it.
And as you know well, I'm not one of those. But it does seem odd to go
CCW for increasing angles.
I just did a git pull and have the pi seeing if it can get thru the
runtests. It hasn't for quite a spell now. Looks like not, runtests is
XFAIL's in wholesale numbers, again, or yet.
>From the build screen:
.Runtest: 188 tests run, 123 successful, 65 failed + 0 expected
Failed:
/media/pi/workspace/LinuxCNC-dev/tests/abort/feed-rate
/media/pi/workspace/LinuxCNC-dev/tests/abort/on_abort_command-crazy-move
/media/pi/workspace/LinuxCNC-dev/tests/abort/stop-button-crazy-move
/media/pi/workspace/LinuxCNC-dev/tests/abs.0
/media/pi/workspace/LinuxCNC-dev/tests/alias.0
/media/pi/workspace/LinuxCNC-dev/tests/and-or-not-mux.0
/media/pi/workspace/LinuxCNC-dev/tests/basic
/media/pi/workspace/LinuxCNC-dev/tests/biquad
/media/pi/workspace/LinuxCNC-dev/tests/ccomp/early-exit
/media/pi/workspace/LinuxCNC-dev/tests/counter-encoder.0
/media/pi/workspace/LinuxCNC-dev/tests/edge/both-starting-high
/media/pi/workspace/LinuxCNC-dev/tests/edge/both
/media/pi/workspace/LinuxCNC-dev/tests/edge/falling-starting-high
/media/pi/workspace/LinuxCNC-dev/tests/edge/falling
/media/pi/workspace/LinuxCNC-dev/tests/edge/rising-starting-high
/media/pi/workspace/LinuxCNC-dev/tests/edge/rising
/media/pi/workspace/LinuxCNC-dev/tests/flipflop.0
/media/pi/workspace/LinuxCNC-dev/tests/halcompile/personalities_mod
/media/pi/workspace/LinuxCNC-dev/tests/halui/jogging
/media/pi/workspace/LinuxCNC-dev/tests/halui/mdi
/media/pi/workspace/LinuxCNC-dev/tests/hard-limits
/media/pi/workspace/LinuxCNC-dev/tests/interp/abort-hot-comment
/media/pi/workspace/LinuxCNC-dev/tests/interp/iniparam-failassign
/media/pi/workspace/LinuxCNC-dev/tests/interp/m98m99/06-error-mixed-sub-styles
/media/pi/workspace/LinuxCNC-dev/tests/interp/oword-mdi-sub-update
/media/pi/workspace/LinuxCNC-dev/tests/interp/pymove
/media/pi/workspace/LinuxCNC-dev/tests/interp/subroutine-return
/media/pi/workspace/LinuxCNC-dev/tests/io-startup/nonrandom/no-tool-in-P0
/media/pi/workspace/LinuxCNC-dev/tests/io-startup/nonrandom/tool-in-P0
/media/pi/workspace/LinuxCNC-dev/tests/io-startup/random/no-tool-in-P0
/media/pi/workspace/LinuxCNC-dev/tests/io-startup/random/tool-in-P0
/media/pi/workspace/LinuxCNC-dev/tests/lathe
/media/pi/workspace/LinuxCNC-dev/tests/linuxcncrsh-tcp
/media/pi/workspace/LinuxCNC-dev/tests/linuxcncrsh
/media/pi/workspace/LinuxCNC-dev/tests/mdi-queue/oword-queue-buster
/media/pi/workspace/LinuxCNC-dev/tests/mdi-queue/simple-queue-buster
/media/pi/workspace/LinuxCNC-dev/tests/motion-logger/basic
/media/pi/workspace/LinuxCNC-dev/tests/motion-logger/mountaindew
/media/pi/workspace/LinuxCNC-dev/tests/motion/jogwheel-axis
/media/pi/workspace/LinuxCNC-dev/tests/motion/jogwheel-joint
/media/pi/workspace/LinuxCNC-dev/tests/remap/fail/args.1
/media/pi/workspace/LinuxCNC-dev/tests/remap/fail/body-ngc
/media/pi/workspace/LinuxCNC-dev/tests/remap/fail/canon_error
/media/pi/workspace/LinuxCNC-dev/tests/remap/fail/prolog
/media/pi/workspace/LinuxCNC-dev/tests/remap/m30-interaction
/media/pi/workspace/LinuxCNC-dev/tests/remap/remap-io
/media/pi/workspace/LinuxCNC-dev/tests/remap/variable-injection
/media/pi/workspace/LinuxCNC-dev/tests/single-step
/media/pi/workspace/LinuxCNC-dev/tests/startup-state
/media/pi/workspace/LinuxCNC-dev/tests/statbuffer-g5x-abort
/media/pi/workspace/LinuxCNC-dev/tests/t0/nonrandom
/media/pi/workspace/LinuxCNC-dev/tests/t0/random-with-t0
/media/pi/workspace/LinuxCNC-dev/tests/t0/random-without-t0
/media/pi/workspace/LinuxCNC-dev/tests/tclsh-extensions
/media/pi/workspace/LinuxCNC-dev/tests/tlo
/media/pi/workspace/LinuxCNC-dev/tests/tool-info/non-random
/media/pi/workspace/LinuxCNC-dev/tests/tool-info/random-no-startup-tool
/media/pi/workspace/LinuxCNC-dev/tests/tool-info/random-with-startup-tool
/media/pi/workspace/LinuxCNC-dev/tests/toolchanger/m61
/media/pi/workspace/LinuxCNC-dev/tests/toolchanger/reload-tool/non-random
/media/pi/workspace/LinuxCNC-dev/tests/toolchanger/reload-tool/random
/media/pi/workspace/LinuxCNC-dev/tests/toolchanger/toolno-pocket-differ/nonrandom
/media/pi/workspace/LinuxCNC-dev/tests/toolchanger/toolno-pocket-differ/random
/media/pi/workspace/LinuxCNC-dev/tests/twopass-personality
/media/pi/workspace/LinuxCNC-dev/tests/twopass
I haven't updated that pi in 3 or 4 weeks. I think I'll comment the
buildbot out of apt and let it update everything but the kernel stuffs.
That reduced the XFAIL's to the same 52 I've been looking at for weeks.
So I'm running what I built on May 7nth on the rpi4. It still had most
of the gfx in the built pdf docs. But its no longer handling the png
inputs for the docs gfx.
Something I need to install? Or edits to my build script?
Thanks Andy.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
