On Sunday 09 August 2020 23:48:24 Gregg Eshelman via Emc-users wrote: > Scroll down farther. It's for Windows, Mac, Linux, and Chrome > Wouldn't have posted it for a Linux user to look at it if was only > for Windows. > > On Sunday, August 9, 2020, 3:54:20 AM MDT, Gene Heskett > <ghesk...@shentel.net> wrote: > > On Sunday 09 August 2020 03:29:38 Gregg Eshelman via Emc-users wrote: > > Try CraftWare https://craftbot.com/software > > Only for windows > Also while fast, it doesn't slice, and it saves only in its own format, so very limited actual, usefull, function. Or I'm missing plugins or ??.
So back 2 cura. Trying to make a flexgear that doesn't fall apart trying to try off the glass. Existing config shows a pin hole or 170 thru the wall where it meets the base. Raised the extruder temp 5C and raised the extruder feed one whole number. Not quite done but is up into the spline and I don't see any pin holes. Looks like the spline tooth may be yet starved at the center of the spline base. About out of string, but will raise extruder feed another whole digit IF this one fits the bearing. That may get me some practice changing string in mid job, as I have 4 or so layers left on 1st spool. Stay safe and well, all. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
