I think FreeCAD is what they call "parametric". This means I can do things like making a square 3X by 2X long and the ratio will always be 3:2. But I can also make the box 6 by 4. If a scale factor like "X" is used is totally up to the person who made the part. It is much shared to make a parametric model than to make a fixed size model so most as fixed size.
So, if what you are looking for depends on the person who designed this and not on FreeCAD. My guess is your.step file is made with fixed dimension On Thu, Aug 13, 2020 at 2:20 AM Gene Heskett <ghesk...@shentel.net> wrote: > > As I have discovered. But I'll have to become MUCH more expert at > freecad, so far I haven't figured out how to get an editable format out > of freecad that shows me the tooth counts and profiles, and how they > could be individually adjusted for a better fit, then re-locked together > so the whole thing could be adjusted in size and remain functional. -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
