On Saturday 19 September 2020 17:02:31 Chris Albertson wrote: > I don't understand this. Wouldn't you look at the file on the monitor > before trying to print it? > > Every project tracks problems differently. Many will use github's > problem tracker. It appears this is the case with FreeCAD. I see > there are currently 41 open issues and over 3,100 closed ones. The > most resent issue is only a few hours old. So the issue tracker is > very active with several per day. Why not open a "g-code file is > empty" issue.
Empty? It isn't even created. Error msg in the terminal says the path it invalid, but it is not. The directory exists and has content. Does anyone know if I'm missing a pluggin or something? So then I go to print it, and it sends an empty page as a pdf, I think. The printer sounded normal, while quickly spitting out a blank page, from the tray I requested. 3 times now. However, it does create the .stl, and its being displayed in cura right now. I don't know if its solid but its just short of 50 meters of fiber, and 30h:33m to render. I'm not going to waste the string. This needs to be steel, or worst case, alu. Even PETG won't last here as it will be handled rougher due to the weight of the BS-1 clone. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
