Andy, Thank you very much. Because of the error message I was looking in the wrong place. That fix got it to load successfully, and allowed me to debug the problem and fix it.
Thanks again, Alan > From: andy pugh <bodge...@gmail.com> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Cc: > Bcc: > Date: Thu, 22 Oct 2020 19:03:25 +0100 > Subject: Re: [Emc-users] Apparent changes in gcode in Linuxcnc 2.8.0 > On Wed, 21 Oct 2020 at 14:52, Alan Condit <condit.a...@gmail.com> wrote: > > > I have a bunch of wizards that I have written under 2.7 and under 2.8 > they won’t work. The biggest change is that you used to be able to write > the subroutine declaration as O< CutBevel > SUB [1] [2] [3] like a formal > declaration of parameters. Now I have to go through and make all of them > just comments like O<CutBevel> SUB ([1] [2] [3]). > > Subroutines get parameters strictly by position, they just appear as #1, > #2 etc. You can have a comment to document what they do, but I don't think > anything has changed there > > The problem is actually line 76: > > G00 X0.0 Z[#Zcut] > > Should be > > G00 X0.0 Z[#<Zcut>] > > -- > atp > > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users