Thank you guys! Still using 2.8 pre without problems but I'll be upgrading soon.
Leonardo Marsaglia El mié., 2 dic. 2020 19:16, Phill Carter <phillcarte...@gmail.com> escribió: > Thanks Andy. > > > On 3 Dec 2020, at 8:36 am, andy pugh <bodge...@gmail.com> wrote: > > > > Version 2.8.1 is largely a bugfix release based on 2.8.0. One > > exception is the porting back of drivers for Mesa 7i95, 7i97 and 7c80. > > > > This should be offered as an automatic update on most systems. > > > > At this time the installer ISO and Pi image will install the 2.8.0. A > > new version of both is likely in the near future, but for reasons > > unrelated to LinuxCNC (mainly to do with requests for specific > > utilities and a network manager that is actually useful) > > New installs should use the existing installers and then update. > > > > Abridged changelog is: > > > > * Docs: Updated Chinese "Getting Started" > > * plasmac: fix conversational path error > > * hostmot2: Add support for Mesa 7i95, 7i97 and 7c80 > > * qtvcp -qtdragon: updates > > * plasmac: Bugfixes > > * qtvcp -many updates > > * Forgot to add source file to Makefile > > * Fix for pre-c99 compilers > > * hm2_rpspi: remove and reinstate the kernel spi driver at > startup/shutdown > > * plasmac: Don't pierce spotting operations and many other updates > > * carousel: changed pocket_number to mod_pocket in direction logic > > * motion.9 motion.feed-inhibit gcode only (not jogs) > > * command.c for consistency, allow jogs if feedhold > > * control.c joint jogs inhibition if feedhold > > * userkins.comp (new) userkins using halcompile > > * gs2_vfd: Fixes how many registers that is written to Closes #506 > > * Update internal names after file renaming in 2004 Closes #922 > > * Fix gpio and pin relationship on rpi2 and later Closes #955 > > * qtvcp -update camview > > * pncconf -allow different home switch offsets on tandem axes > > * added hal pin to allow preview refresh > > * pncconf -raise spinbox limits in tune test > > * pncconf -fix PID maxerror setting in the tune test for metric machines > > * Docs: Pi links should be http not https > > * Docs: Add links to the Raspberry Pi SD card image to the install docs > > * dbounce.comp (new) alternative debounce component > > * docs: plasmac user guide update > > > > Thanks to the authors of these changes: > > > > Chris Morley > > Damian Wrobel > > Dewey Garrett > > elovalvo > > Greg Carl > > Håvard Flaget Aasen > > issyvarsano > > Jeff Epler > > Klaus Naumann > > Peter C Wallace > > Phillip Carter > > Rene Hopf > > Thomas Burkhard > > > > > > -- > > atp > > "A motorcycle is a bicycle with a pandemonium attachment and is > > designed for the especial use of mechanical geniuses, daredevils and > > lunatics." > > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
