Are you going to be able to use the "wrap" feature of 2d tool paths in
fusion to get this done? Or are you a licensed/paying user? Autodesk has
really gutted the 4/5th axis cad from the free version.
I did some more complex milling a few months back and ended up buying a
4th license. If you're doing anymore more than wrapping you'll need to
consider inverse time feed rates. There's a post processor posted by the
guy that runs the metalmusings youtube channel that seems ok if you need
that. Give his vids a watch as well for some explanations.
-Dave
On Wed, 06 Jan 2021 17:02:38 -0500, andrew beck <andrewbeck0...@gmail.com>
wrote:
Hey everyone
I have a job to do engraving the od of a wheel. I currently have a 4th
axis but haven't bolted a motor on it. I can suss this part though.
And I
use fusion360 for cam.
I have never done 4th axis work before. And don't even know if anyone
has
a linuxcnc post processor set up.
If anyone out there has done this I would love to hear from you. I have
about a week to get this working.
Regards
Andrew
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
