On Saturday 13 March 2021 18:14:57 Gene Heskett wrote: > The ejector is no longer being driven by cura output! > > Something had deleted at least the ejector data, so I unpacked the > patch again, named CuraDremelSupport-main.zip, DDG for it, and > recopied the resources tree into > /home/gene/.cache/4.8./definitions/4.8.0/. > > And now it looks like it has extruder data again. > > I am going to chattr -i the whole tree.
And did. > Cheers, Gene Heskett I believe I found the real problem. Marlin, the gcode interpreter in the printer, does NOT understand the "use relative extrusion" command, I changed cura back to absolute which due to the bigger E numbers made the gcode 100k bigger, but its working. Sorta, It wasn't sticking to the matterhackers glass glue, not near as well as the purple stick kiddy glue, but that stuff builds up on the glass if you don't pull the plate and clean it off with hot water about every other print. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
