Greetings all; I just took an older off lease dell that I had installed our latest buster respin on, named it TLM cause it going that little 7x12 lathe you folks nickname the little monster when I was busting stuff in the spindle drive with a 1hp treadmill motor spinning it. But that atom, D525mw mobo seemed like it was getting slow in comparison to all the other 4 core i5's, which I had bought a 4 pack of, and have swapping them, one at a time, into the other intel atom machines. latency of those i5's is great, I left this machine running latency-test w/o a bse thread for about 40 hours, worst case was 12 microseconds.
The 3rd one however, while it had a lcnc install, and a copy of the linuxcnc directory of the atom box installed, didn't want to boot when moved to the shop. Showing a slowly cycling colors solid color screen for longer than it should have taken it to fckeck a 240G SSD. A good ten minutes. Eventually it booted on the third powerup, but no net, ip a showed eno1 at the old machines .8 address. ??? There is not a dhcp server running here that I know of, everything has a name, a copy of the hosts file and all machines have their static address data in /e/n/i. sudo restart networking, ip a showed no ipv4 or ipv6 address for eno1. wash, rinse, repeat, worked correctly, 3 more times even. Does anybody have a clue what could get in the way, then finally step aside & let it work like its configured to do? Thanks all. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
