Anno domini 2021 Sun, 28 Mar 09:52:53 -0700 John Dammeyer scripsit: > > From: andy pugh [mailto:[email protected]] > > > > On Sun, 28 Mar 2021 at 14:50, Gene Heskett <[email protected]> wrote: > > > > > This is clear petg, but I simply cannot get it to stick to the glass. > > > > I covered my build plate with one of the sheets of PEI sold for the > > purpose, and most things stick well. > > An occasional wipe with an alcohol-soaked rag helps on the occasions > > when adhesion isn't working. > > > > In fact, PETG has been sticking a bit too well recently. > > A friend has told me he's had PETG stick so well that it breaks off some of > the glass build plate. Seems a bit extreme but that's what he's reported.
I had the very same problem. My solution: I drip som ml alcohole or isoprop on the part and plate when the plate is still warm. It creeps between part&plate and makes it pop up. Nik > > John Dammeyer > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ... _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
