^ thanks andy. On Mon, Mar 29, 2021 at 10:23 PM Sam Sokolik <samco...@gmail.com> wrote:
> http://electronicsam.com/images/greenmachine/IMG_20210329_220745.jpg > > On Sun, Mar 28, 2021 at 5:17 PM Sam Sokolik <samco...@gmail.com> wrote: > >> have not done any destructive testing - but finally grabbed an oem650 >> drive so I can have full 4 axis to play with. Seems to run the rotary >> atleast as good as the leadshine. >> >> http://electronicsam.com/images/greenmachine/IMG_20210328_165552.jpg >> >> On Wed, Mar 24, 2021 at 8:36 AM Sam Sokolik <samco...@gmail.com> wrote: >> >>> I have a cheap chuck that is held on with 3 cap head screws. My plan is >>> to make a disk that registers the center of the faceplate and the inside >>> lip of the chuck. - I don't remember the exact size.. about 4.5" >>> >>> On Tue, Mar 23, 2021 at 9:48 PM John Dammeyer <jo...@autoartisans.com> >>> wrote: >>> >>>> >>>> >>>> > From: Sam Sokolik [mailto:samco...@gmail.com] >>>> > http://electronicsam.com/images/greenmachine/IMG_20210321_133551.jpg >>>> > >>>> >>>> So Sam, >>>> What's the diameter of the faceplate? >>>> And are you planning on mounting a chuck onto it? >>>> >>>> If so, all the front mount ones still need some sort of registration >>>> groove on the inner diameter of the mounting screws. >>>> >>>> Andy Pugh created a faceplate for his Harmonic drive that had camlock >>>> chuck capability. This way he could move his 3 or 4 jaw chuck from the >>>> lathe to the 4th axis on the mill. >>>> >>>> In my case I have a South Bend Heavy 10L with the threaded spindle. >>>> Short of modifying it with some sort of locking nut or pin to prevent >>>> reverse rotation off the threads, I'm not sure putting a threaded nose onto >>>> a 4th axis is a good idea. >>>> >>>> A smaller chuck on a faceplate that is threaded for the South bend but >>>> has screws and a registration groove for the 4th axis seems like an idea >>>> that might work. I have 3" chucks for the Gingery Lathe but they are on 16 >>>> TPI threaded arbors. >>>> >>>> John Dammeyer >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users