Hi all,
I'm trying to use a 7i43 I've had on the shelf for awhile.
200K version despite the error message. :-)
I've tried it on several motherboards and several paraport cards with
pretty much the same result.
Hopefully someone can give me a hint of what is really wrong.
Below is the message I get:
LINUXCNC - 2.7.14
Machine configuration directory is
'/home/dave/linuxcnc/configs/by_interface.mesa.hm2-servo'
Machine configuration file is '7i43-small.ini'
Starting LinuxCNC...
Found file(REL): ./hm2-servo.hal
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
hm2_7i43: failed to clear EPP Timeout!
hm2_7i43: /DONE is not low after CPLD reset!
hm2/hm2_7i43.0: board has FPGA '3s400tq144', but the firmware in
hm2/7i43-2/SVST4_4.BIT is for FPGA '3s200tq144'
hm2_7i43.0: board at (ioaddr=0x0378, ioaddr_hi=0x0000, epp_wide ON) not
found!
hm2_7i43: rtapi_app_main: Invalid argument (-22)
./hm2-servo.hal:43: waitpid failed /usr/bin/rtapi_app hm2_7i43
./hm2-servo.hal:43: /usr/bin/rtapi_app exited without becoming ready
./hm2-servo.hal:43: insmod for hm2_7i43 failed, returned -1
Shutting down and cleaning up LinuxCNC...
hm2: unloading
Note: Using POSIX realtime
So is there a cure or do I go find another approach?
TIA
Dave
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
