Following is a snippet of a program using G33.1
The first hole is tapped correctly then all the rest get switched X and
Z. It will move to X -.8 then back then to x-.25 and repeat for the rest
whether there is a G33.1 on the line or not.
Using Version 2.7.14
g53g0z0
m6t25
g43h25
m3s500
g0x-.25y0z.2
g33.1k.0556z-.8
g33.1x-1k.0556
g33.1x-1.625k.0556
x-2.375k.0556
x-3k.0556
x-3.75k.0556
x-4.375k.0556
x-5.125k.0556
m5
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users