On Wed, 2 Jun 2021, Fox Mulder wrote:
Date: Wed, 2 Jun 2021 20:06:05 +0200 From: Fox Mulder <[email protected]> Reply-To: "Enhanced Machine Controller (EMC)" <[email protected]> To: [email protected] Subject: Re: [Emc-users] How to change step pulse width for stepper driverSo i tried setting stepspace = 10000 but no change. Then i tried setting both steplen and stepspace to 10000 and also no change. It seems as if LinuxCNC ignores my values. When i open HAL Meter and show the current value it shows me 75000 for both of them. But this would mean 75s pulse width which i don't have. It is still around 2,3s. I attached my old confiurations and maybe someone can see what the problem is. I don't know if i have to change something else for the current version of LinuxCNC. I only know that the configs worked back then when i last used them 15 years ago. :) Ciao, Rainer
"setp parport.0.reset-time 5000" is what is setting the step pulse length When you use reset mode its normal to set steplength and stepspace to 1 Peter Wallace Mesa Electronics _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
