On Thu, 10 Jun 2021, Ralph Stirling wrote:
Date: Thu, 10 Jun 2021 14:58:24 +0000
From: Ralph Stirling <ralph.stirl...@wallawalla.edu>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "emc-users@lists.sourceforge.net" <emc-users@lists.sourceforge.net>
Subject: [Emc-users] Multiple 7i90 cards on Rpi 4b
The man page for hm2_rpspi indicates that multiple SPI
cards may be connected to a single pi4, using the spi_probe
parameter to which SPI port and chip enable line should
be used for each card. Has this been found to work well?
I have an application that needs two 7i90hd's, and I will
be making a small pcb to connect the 7i90hd's and the 4b.
My single 7i90/4b card is working fine.
Thanks,
-- Ralph
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I have not tried it. Cabling and signal integrity might be an issue.
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users