Andy, In synaptic settings I have: deb http://linuxcnc.org buster 2.8-rtpreempt base
and debsrc http://linuxcnc.org buster 2.8-rtpreempt base Seb replied direct to me and I did get updated with "sudo apt update" and "sudo apt upgrade”. However, I generally prefer Synaptic, so thank you for helping with synaptic. I don’t see anything obviously wrong with what I have and what is shown on the Updating-linuxcnc webpage. Debian Buster - preempt deb http://linuxcnc.org buster base 2.8-rtpreempt I hadn’t updated in a long time. I had just been re-installing, so I may have forgotten a step. Thanks, Alan > On Sep 27, 2021, at 7:18 AM, emc-users-requ...@lists.sourceforge.net wrote: > > From: andy pugh <bodge...@gmail.com> > Subject: Re: [Emc-users] LinuxCNC 2.8.0 upgrade > Date: September 27, 2021 at 6:56:27 AM CDT > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > > > On Sun, 26 Sept 2021 at 15:03, Alan Condit <condit.a...@gmail.com> wrote: >> >> I tried to upgrade my LinuxCNC 2.8.0 on my lathe but Synaptic reported that >> 2.8.0 is the latest version. >> The downloads page of the website shows 2.8.2 is the current version. > > What do you have in Synaptic Settings->Repositories? > > > -- > atp _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
