On Saturday 02 October 2021 14:50:09 Gene Heskett wrote: I'm being ignored, why? > Greetings all; > > The attached file would be quite a bit easier to trace and hook up in > a .hal file if it was subjected to the joints update script. There now > exist in both the listings for halmeter, halshow and halscopeidentical > names for signals I need, some of which I have been able to exercise > to prove they would work, but some, like jogs, don't seem to be valid > signals although they'll show in halshow too.
I have it hooked up, I think, but its not working, because applying a logic true to "halui.axis.z.select" has no effect when the gui is showing x button is active. And vice-versa. Anybody have an idea why? I have this in postgui.hal loadrt jogaxisget addf jogaxisget.0 jog-thread # a 200 hz thread [...] # narrow 300ms plus pulse from X dial only if active # signame 1st used in main .hal file net xretrigger jogaxisget.0.Xin1 halui.axis.x.select # narrow 300ms plus pulse from Z dial only if active # signame 1st used in main .hal file net zretrigger jogaxisget.0.Zin1 halui.axis.z.select net axis:0:kb jogaxisget.0.Xin0 joint.0.kb-jog-active net axis:1:kb jogaxisget.0.Zin0 joint.1.kb-jog-active net Xisactive jogaxisget.0.Xverify axisui.jog.x net Zisactive jogaxisget.0.Zverify axisui.jog.z Thanks for any advice. Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
