Hello again! I am receiving a message on LinuxCNC startup that 7i71 board has old firmware. So I have a question (most probably, for PCW) - how exactly should I do it?
I found a zip file with firmware and update scripts here: http://www.mesanet.com/software/parallel/sserial.zip I found a readme file in there, but I am not sure I understand correctly the instructions. My setup is 5i25 board with 7i77 attached to its P3 connector. And 7i71 is attached to 7i77. In HalShow 7i71 shows up as hm2_5i25.0.7i71.0.2. That means it is on channel 2. >From readme file it seems that in terminal I should run this command: ./updatess 7i71 5i25 2 7I71R14.BIN Is that correct? Or should I omit the firmware file name? I also am not sure that I understand, where the firmware file has to be placed. In the same folder, where updatess script? Or do I have to run ssinstall script before that (with "sudo ./ssinstall") to get the firmware files in correct places? Viesturs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
