I always end up with the odd ones that have no match. No packaged IC's
on the other side of the board either.
The colors used on this are 3 that are White and one each of Brown, Red,
Yellow, Green and Blue. None have a stripe.
On 11/28/21 02:53, Les Newell wrote:
Take a look at this pdf, page 87
<,https://www.heidenhain.us/wp-content/uploads/349529-2H_Rotary_Encoders_en.pdf>.
If it's an incremental encoder, that's probably the correct pinout.
Les
On 28/11/2021 06:07, Bari wrote:
Found this encoder in a box with the cable snipped off. I haven't
found a signal pinout for the 12 pin connector inside. Anyone have
one or know where to find one?
Part number is missing for the encoder.
https://imgur.com/T9TIH8Z
Thanks in advance.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
