I suspect the problem will not be the changes to LCNC, but the wrong version of the OS ... I'll have a look though, as that looks easy enough.
On Mon, 10 Jan 2022 at 19:52, andy pugh <bodge...@gmail.com> wrote: > On Mon, 10 Jan 2022 at 18:53, Robin Szemeti via Emc-users > <emc-users@lists.sourceforge.net> wrote: > > > > I'll probably just leave that one alone then, it spends most of its time > > cutting aluminium, where it isn't a problem. I'd rather just have it > > working than spend too much time re-configuring it. > > The changes required to go from 2.6 to 2.7 are minor: > > http://linuxcnc.org/docs/2.7/html/getting-started/updating-linuxcnc.html#_updating_configuration_files > > The 2.8 changes are significant, but almost entirely handled by an > automated script. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users